The Current American Political System - 1214 Words

The current American political system has many flaws, and problems that affect our everyday life as American citizens. Our government is quite possibly the biggest problem in our country. In my honest opinion, I feel as if the government does not completely satisfy the wants and needs of the citizens in this country, or protect the citizens. We have seen many executive decisions that the American people do not accept, or follow. One of the biggest mistakes in our recent history was elected President Barrack Hussein Obama. Obviously, not every single person will agree that President is the problem in our country today, but I believe he is. Obama claims that he a committed Marxist collectivist, and wanted to show that through his presidential decisions. We have seen our president threaten the safety of our citizens in countless ways. Most people tend to forget that President Obama expanded the war on trial by jury, asserting the right to kill any American civilian with drones. There is way too much power held by him if he has the right to kill any person in this country with a drone. Obama spent basically his entire first year in office tendering to the health care system, which was a defining issue of his presidency. The way that Obama went about trying to pass his program caused separation in Congress. The president and congressional Democrats used a cut-throat tactic to pass the program, basically shoving down anyone that stood in the way. Following the passing of theShow MoreRelatedAmerican Politics Vs. The Netflix Series House Of Cards756 Words   |  4 PagesProvisional Title A Case Study on American politics portrayed in House of Cards and its correlation to the current political climate 1 Introduction The American Netflix series House of Cards is a political drama that follows Frank Underwood (Kevin Spacey) rising through the ranks from Democratic Majority Whip in the House of Representatives to Vice President and later President of the United States by achieving his political power through manipulation and ruthless pragmatism with the aid of hisRead MoreThe Political System Of The United States1053 Words   |  5 Pages compared to other systems in the world. Where did the founders of the U.S. get their ideas for the political system we have today? The U.S. political system is made up of many components and there are several factors the contributed to what the U.S. political system is today. Such as, where the foundations of the U.S. government came from, the American idea of government, the characteristics of American society and political culture, and the values and principles of American democracy. The foundingRead MoreBroken Politics And Broken Dreams1440 Words   |  6 Pagesnot because American politics are broken and ineffective at their main purpose. America, the once great country we live in used to be a strong and independent Nation. Then we reformed it until we butchered the very finely laid out government systems we had in place. The many â€Å"intricate, informal system of political intermediation† that America had formed did not die from being outdated or suicide, but instead â€Å"we reformed it to death† (Rausch 53). â€Å"For decades, well-meaning political reformers haveRead MoreThe Life Of The Party1477 Words   |  6 Pagescandidates and Congress shutdowns, many Americans are left unsatisfied with their government. It has become obvious that the Republicans and Democrats will not and cannot work cooperatively. America s two-party system has become detrimental and must be opened to third-party involvement. This would restore political competitiveness, forcing candidates to prove themselves even further. Furthermore, this reveal many more opinions and opportunities to the eye of the American public, all owing for entirely educatedRead MoreBroken Politics And Broken Dreams1282 Words   |  6 Pagesnot because American politics are broken and ineffective at their main purpose. America, the once great country we live in used to be a strong and independent Nation. Then we reformed it until we butchered the very finely laid out government systems we had in place. The many â€Å"intricate, informal system of political intermediation† that America had formed did not die from being outdated or suicide, but instead â€Å"we reformed it to death† (Rausch 53). â€Å"For decades, well-meaning political reformers haveRead MoreEssay about Cynicism of the American Political Process1009 Words   |  5 PagesPolitical inactivity on the part of young Americans stems from one fundamental source -- a general cynicism of the American political process. This disdain for politics is further perpetuated by a lack of voter education and a needlessly archaic voting procedure that creates barriers to voting where they need not exist. While many of these existing problems can be rectified with relative ease through the implementation of programs such as Internet vot ing and better voter education, such programsRead MoreThe Presidential Election Has Never Like An Eternity, The Embarrassment Of American Politics1307 Words   |  6 Pagesopponent, Hillary Clinton. This has left a bittersweet taste in the mouth of many Americans, and after constantly being told to choose between the lesser of two evils, I believe this whole process has given us an important message: the duopoly of American politics isn’t working for us anymore. Since the founding of the Republican Party in 1854, the American political landscape has been dominated by the two major political parties in the United States: the Democrats and Republicans. While the partiesRead MoreHow the Current Economic System Is Subverting the Effectiveness of the Contemporary Political System in America: An Analysis1701 Words   |  7 PagesBy virtually all accounts, it is much easier to cite the problems and faults with the current system of American democracy than it is to cite possible solutions. This somewhat idealistic form of government, in which the people elect their own officials and have an uncontested sway in the determination of policy and politics as it relates to their lives, has systematically decreased in efficacy to the point where it has become more and more difficult to decipher the will and intentions of the citizensRead MoreAnalysis Of The Movie House Of Cards 1448 Words   |  6 Pagesprimarily focuses on Underwood s relentless pursu it of power and following his journey climbing the Washington Political ladder. He goes from House Congressional Whip, to finally president at the end of season 2. The show itself represents a critical and cynical look at US politics. This is further proven by the fact that Frank Underwood thrives in this system. The main critiques of the system come from the importance of the media and how public perception is a driving force in influencing politics,Read MoreThe First Lecture, By James Caesar1176 Words   |  5 PagesFor many Americans today, a feeling of dismay and despair is present whenever a conservation turns towards the political races happening this year. To the average American, this election has become a mockery of the electoral system. Philosophy is being replaced with stupidity and knee-jerk reactions, and it seems as though the political parties’ cater to the lowest denomination of intelligence. When one hears Democrats versus Republicans, demagoguery and divis ion are usually among the first things

Federalism and the Triad of Powers in America - 819 Words

When problems arise in our nation, we are left with a complicated crisis as to whose job it is to do what and who exactly should be taking care of any bad situation that seems to pop up with daily life anywhere in the world, but in this case, America. Certain governmental systems, such as Federalism, can be considered a solution to these crises. Federalism can be defined as the relationship between the individual state governments of America and the national or federal government of the United States; and works to balance the power of a large central government, and the power of the smaller regional governments. Federalism is defined in our book as: â€Å"the relationship between the centralized national government and the individual state governments† (Berman and Murphy 92). Federalism is a very important government system that is frequently discussed and argued, even today. The topic of federalism has become a topic of argument because many people believe the federal governm ent should have more power, and yet some other people believe the states should have most of the power. One of the ways that federalism is in our government is in our Congress, and indirectly through Congress to the difference in laws between the states. We can look at all the different speed limits in all of the individual states; they are not all the same. This is because the residents of any certain state and the representatives of that state can choose whatever they deem fit to set as limits. AnotherShow MoreRelatedCapital Punishment And The Death Penalty2429 Words   |  10 Pagesstructures and foundations for organizing society are on the basis of acceptance of religion, that devout men have the responsibility for government and the administration of the country. Offices and bodies, appointed rather than elected, hold the real power in the government. There is a supreme leader who serves as the head of state, appointed by the Assembly of of Experts, an Islamic religious advisory board. The Supreme Leader oversees the military and judiciary and appoints members of the GuardianRead MoreNational Security Outline Essay40741 Words   |  163 PagesDivision of Nat’l Security Powers Between Congress, the President and the Court 48 The 1973 War Powers Resolution 49 II. The War Powers Resolution: A Debate between JNM and Frederick Tipson 50 CHAPTER 18: The National Security Process 60 CHAPTER 19: intelligence and Counterintelligence 63 CHAPTER 20: Access to Information 65 CHAPTER 21: Freedom of Expression 70 CHAPTER 22: National Security and the Fourth and Fifth Amendments 73 R. J. Rummel, â€Å"Power Kills; Absolute Power Kills Absolutely (Oct

The War Of The Civil War - 777 Words

The widespread violence that turned into the Civil War began with the election of 1860. Abraham Lincoln won the election of 1860 without a single vote from the states below the Ohio River. South Carolina was the first state to respond to Lincoln’s election. On December 20, 1680, South Carolina seceded from the Union. South Carolina was the first of the â€Å"Original Seven† who seceded from the Union, including Mississippi, Florida, Alabama, Georgia, Louisiana, and Texas. This became known as â€Å"secession winter,† and these states decided to form the Confederate States of America. The American Civil War was four years of American bloodshed on American soil, but why? There is a common misconception that the Civil War was fought over slavery, but there were a variety of reasons as to why the war started. Ever since the declaration of America’s independence in 1776, the country was divided. The Civil War changed America because it brought the nation togeth er, made the national government superior to the state governments, helped the United States become an industrialized nation, and began the journey of equality for African Americans. Inevitably, the Civil War brought the nation together because it was a part of how our nation was built. The war also ended the idea that states could secede. Northerners were â€Å"pro-Union† in the sense that they did not believe that the Southern states did not believe that the Southern states had a legitimate excuse for seceding. Lincoln’s administrationShow MoreRelatedCivil Wars And The Civil War873 Words   |  4 Pages Therefore, the fact that ISIL has become very active in the context of civil war could be a strong indicator of its affiliation to AQ. This, as Robbins (2014) argues, is because civil wars can be said to be better and more reliable predictors of AQ affiliated groups than mere affiliation. This further means that the civil wars in Syria and Iraq could be better used to determine which groups taking part are AQ-affiliated than the mere fact that the groups have been known to be affiliated. It meansRead MoreThe War Of The Civil War1522 Words   |  7 PagesCosts The war produced about 1,030,000 casualties, including about 620,000 soldier deaths—two-thirds by disease, and 50,000 civilians. The war accounted for roughly as many American deaths as all American deaths in other U.S. wars combined. Based on 1860 census figures, 8% of all white males aged 13 to 43 died in the war, including 6% in the North and 18% in the South. Union army dead, amounting to 15% of the over two million who served, was broken down as follows: Notably, their mortality rateRead MoreThe War Of The Civil War964 Words   |  4 Pageswasn’t one sole cause of the Civil War but there were many events that took the country to war and put brother against brother and states against states. Abraham Lincoln wanted to preserve the union and that could only be attained by civil war. Slavery which was an underlying cause for the war played its role in the division that divided the North against the South. Ultimately the preservation of the union, slavery and the consequences and conflicts leading to the Civil War all rested on President Lincoln’sRead MoreThe War Of The Civil War1540 Words   |  7 PagesOver the course of the Civil War, approximately three million men (and a handful of women disguised as men) served in the armed forces. By comparison, before the war, the U.S. Army consisted of only about 16,000 soldiers. The mobilization that took place over the four years of the war touched almost every extended family North and South and affected the far reaches of the country that had split in two. By war’s end, approximately 620,000 men had died, an estimate that is currently undergoing scrutinyRead MoreThe War Of The Civil War921 Words   |  4 PagesThere are no doubts that acts of war can have a negative impact on the individuals involved. There are countless stories of the soldiers’ experiences in the war, and how it affected their lives, families, and attitudes. However, there is a large demographic that is hardly accounted for: children, specifically during the Civil War era. Understanding the children that lived in the time of the Civil War is important because it affected their future careers, shaped their attitudes towards race, and affectedRead MoreThe War Of The Civil War1039 Words   |  5 PagesThe civil war is by far the bloodiest war in American history. In the four de adly years of war, over six-hundred thousand Americans were killed. Many disputes that led to the civil war. These conflicts started under President James Buchanan who was a Democrat elected in the election of 1856. The issue of slavery, states’ rights, the abolitionist movement, the Southern secession, the raid on Harper’s Ferry, the election of Abraham Lincoln all contributed to the start of the civil war. The civil warRead MoreThe War Of The Civil War1284 Words   |  6 PagesEnglish 30 January 2015 The Civil War There are many facts most people generally do not know about the Civil War, so much research is needed to improve one’s knowledge about the Civil War. Authors such as: Robert G. Lambert, Rustle B. Olwell, and Kay A. Chick were all helpful in this research. Many people think that everyone on the Union side of the war believed that blacks should be equal to whites. Most people also think that everyone on the Confederate side of the war believed in slavery. SomeRead MoreThe War Of The Civil War Essay1444 Words   |  6 PagesThe story of this outlaw originated during the Civil War years, April 12,1861-May 9, 1865. The War were the rich sat and watched, while the poor died. A War that wanted to keep black people as slaves permanently by the South (Confederates). Newton Knight quickly grew unhappy with the situation that the people of Jones County, where he was originally from were in. He also did not approved of slavery at all. Newt was the Outlaw who freed Jones County s people, whites and blacks alike when they mostRead MoreThe War Of The Civil War1093 Words   |  5 PagesThe Civil War served as yet another reminder that although the US had successfully broken off away England, a long road still remained before total domestic unity. This war was bloody and it divided the nation, towns, and even families. With both sides fighting for their personal ideologies, this was more than a mere territorial war. Many aspects of this war will forever act as a blemish on our nation s history. In this essay, we will explore one aspect; the camps that were used to contain the prisonersRead MoreThe War Of The Civil War Essay944 Words   |  4 Pages The War of Succession, universally known as the Civil War, was a war unlike any other. According to the Civil War Trust, â€Å" it was the most immensely colossal and most destructive conflict in the Western world between the cessation of the Napoleonic Wars in 1815 and the onset of World War I in 1914.† It commenced when the Confederate army assailed Fort Sumter on April 12, 1861. The Civil War was a rigorously catastrophic event for both the North and the South. About 360,000 of the Union’s men were

Inventory Management Developed for Australian Labs

Question: Discuss about the Inventory Management for Developed for Australian Labs . Answer: Introduction The report is developed for Australian Labs to develop and implement an automated inventory management system at their end. A paper based inventory management and tracking system is currently used in the Australian labs which causes a number of faults and mismanagement and leads to unhappy customers. The project will develop an advanced inventory management system linked with the latest database to manage all the tests that are received by the labs along with the provision of providing accurate status updates and turnaround estimates. The report suggests the two approaches for system development along with the functional and non-functional requirements associated with the project. Project schedule, stakeholder analysis and the information investigation techniques have also been covered in the report. Approach to Systems Development Approach 1 The first approach that can be used to develop the inventory management system for Australian labs is the predictive waterfall model for software development. This approach will apply to this project as the requirements for the development process are well clear and there are lesser chances of major changes and inflation associated with the same. The waterfall model for software development proceeds in a step by step manner and will include the following phases: Requirements Analysis and Definition The requirements that will be provided by Jim Larsen will be analysed in order to decide the project strategy and understand the project objectives. The requirements will also be classified in functional and non-functional categories. Resource allocation, cost/benefit analysis and project schedule will also be completed in this phase (Lott, 1997) System and Software Design On the basis of the requirement specifications, design specifications will be created in the form of a number of design diagrams and blueprints. System Development and Unit Testing The coding phase will begin in this phase along with the setting up of the database for the system. A unit testing of the entire code will be done to rectify the basic issues detected. System Testing and Implementation The entire software build provided by the development team will be tested as per the test approach and the defects will be reports. There will also be change requests and performance management done under the implementation of the system. Operations and Maintenance This is the last phase in this approach which will deal with the release activities and the post-production tasks such as handling of issues at the users end. Approach 2 The second approach that has been suggested for the development of inventory management system for Australian labs is the Agile Software Development methodology. This is the adaptive approach towards software development that works on the ad-hoc basis. The requirements are more of static in this project and are less likely to change. However, there can be a few last minute changes and this methodology will allow incorporating the same without any re-work. Also, the customer will be involved in every single phase of the project and would be able to provide the valuable comments and feedback at every step (Habib, 2013). The development process will proceed in the form of iterations which are termed as sprints as per the agile methodology. Every sprint will work on a sub-set of the entire list of the requirements and will have a daily scrum meeting of a short duration to understand the progress and required effort. One sprint will last for three to five weeks and the customer will be involved during the entire set of activities. The customer feedback along with the product and sprint backlog will be utilized in the next sprint. The end product will then be produced as the final outcome. Sources of Software There are a number of sources of software which are as listed below along with the advantages of each. Information Technology Service Firms This is the source in which an IT firm outsources its software to other organizations. These can be customized as per the required application and are preferred as they come with vendor support, documentation and customization. Packaged Software Products These are also termed as off-the-shelf software as the organizations offer these packages for commercial utilization. These are generally cheaper and are available immediately (Hoffer, George, Valacich, 2016). Enterprise Solutions Software These are also a widely used software source as it provides complete integration with the current business processes of an organization. Cloud Computing This is the newer form of the software source as it comes free from the requirement of a computing infrastructure for using the same. The software is provided over the internet and the customers can easily use the same from over there. Open Source Software These are the software that are available for free and come with the basic to advanced features for the users. In-House Development Organizations also tend to go for in-house development of the required software if they have the required skill set present. This form of software is always designed such that the required specifications are fulfilled. There are a number of off-the-shelf software packages that are available. The choice of the same shall depend upon the need and requirement of a particular project along with the project budget and the skill set that is available with the organization. In case of the Australian labs project, the following off-the-shelf software can be utilized to remain low on cost and high on availability and requirements: Microsoft Project for designing and managing the project schedule Adobe Dreamweaver for coding MySQL database for keeping the customer and vendor information stored and also to manage the same Word processors and spreadsheets for reporting and other documentation (Zentz, 2013) Systems Requirements Functional Requirements Login Functionality The users will be allowed to login to the application and the three types of users will be setup as administrator, customer and technician. Inventory Tracking The option would allow the user to enter their order id and the tracking details will be displayed in terms of a report that will contain the customer information, date of request, current status and the delivery date. Extraction of Reports The customers will also be allowed to print or save their test reports and the collection details will also be displayed. Cancellation Requests The customers will also be provided to cancel the requests after 12 to 24 hours of the placement of the same. Request tracking for technicians The option will be allowed only for the technicians to view the requests that are pending to be completed along with the ones that have already been completed. It will allow them to devise the strategy accordingly. Automatic Alerts The system will generate alerts to the users on the completion of their requests. Admin role The admin will be able to set up user privileges along with setting up of the priorities on the requests that are received. Non-functional Requirements The following set of non-functional requirements will be fulfilled by the inventory management and tracking system. Usability: The system must be usable for the customers as well as form the technicians. It should have smooth navigations and must be designed to fulfil all the requirement specifications for Australian labs. Reliability: The information that is presented on the system must be reliable and accurate in nature. It must be updated regularly to show the latest piece of information from the database. Performance: The system should score well on the performance in terms of the response time and the user experience. Scalability: The system should be scalable in nature that is it should always have the scope to upgrade and add new functionalities without compromising on the existing ones (PUROHIT, 2016). Availability: The system must be available on a 24x7 basis and the downtime in case of an attack or a disaster should be minimal. Project Cost Benefit Analysis Cost benefit analysis is defined as a process where decisions are made on the basis of cost invested and benefits obtained from an information system in order to find whether the investment would be of any use. In this project, the process has been carried out to find the economic feasibility of the project. For this, Net Present Value and Return rate are calculated. In addition to this, payback period is also being calculated. As shown in the calculations above, NPV is positive and net return of investment is 7% and break even occurs between 3 and 4 years i.e. 3.99 years i.e. payback period turns out to be 4 years. Hence, from this analysis, the proposed system is feasible and can be started. This result comes with 6% discount factor. Fiscal Year Program Element Element Manager 2016 2017 2018 2019 2020 Element 1 Total cost $80,000 Element 2 Maintenance $25,000 $25,000 $25,000 $25,000 Program Total Costs By Year $80,000 $25,000 $25,000 $25,000 $25,000 Program Grand Total Cost $180,000 Fiscal Year Benefit Sources 2016 2017 2018 2019 2020 2021 Cost Reduction $40,000 $40,000 $40,000 $40,000 $40,000 Total Benefits Per Year $0 $40,000 $40,000 $40,000 $40,000 $40,000 Confidence Factor 100% 100% 100% 100% 100% 100% Benefits Claimed for Analysis $0 $40,000 $40,000 $40,000 $40,000 $40,000 Program Grand Total Benefit $200,000 Fiscal Year 2016 2017 2018 2019 2020 2021 Undiscounted Flows Costs -$80,000 -$25,000 -$25,000 -$25,000 -$25,000 $0 Benefits $0 $40,000 $40,000 $40,000 $40,000 $40,000 Net Cash Flow -$80,000 $15,000 $15,000 $15,000 $15,000 $40,000 Discount Factors Discount Rate 6.0% Base Year 2016 Year Index 0 1 2 3 4 5 Discount Factor 1.0000 0.9434 0.8900 0.8396 0.7921 0.7473 Discounted Flows Costs -$80,000 -$23,585 -$22,250 -$20,990 -$19,802 $0 Benefits $0 $37,736 $35,600 $33,585 $31,684 $29,890 Net -$80,000 $14,151 $13,350 $12,594 $11,881 $29,890 Cumulative -$80,000 -$65,849 -$52,499 -$39,905 -$28,023 $1,867 Net Present Value $1,867 Internal Rate of Return 7% Table 1: Cost Benefit analysis However, with 10%, the NPV is negative, hence it is not economical feasible to develop the proposed system. Project Schedule Work Breakdown Strutcure DESCRIPTION START DATE END DATE DURATION (days) 1. Inventory Management and Tracking System 8/25/16 11/11/16 76 1.1 Initiation 8/25/16 9/7/16 12 1.1.1 Evaluation Recommendations 8/29/16 8/31/16 2 1.1.2 Develop Project Charter 8/31/16 9/2/16 2 1.1.3 Deliverable: Submit Project Charter 9/2/16 9/3/16 1 1.1.4 Project Sponsor Reviews Project Charter 9/3/16 9/5/16 2 1.1.5 Project Charter Signed/Approved 9/5/16 9/7/16 2 1.2 Planning 9/7/16 9/19/16 12 1.2.1 Create Preliminary Scope Statement 9/7/16 9/12/16 5 1.2.2 Determine Project Team 9/12/16 9/13/16 1 1.2.3 Project Team Kickoff Meeting 9/13/16 9/13/16 0 1.2.4 Develop Project Plan 9/13/16 9/16/16 3 1.2.5 Submit Project Plan 9/16/16 9/16/16 0 1.2.6 Milestone: Project Plan Approval 9/16/16 9/19/16 3 1.3 Analysis and Design 9/19/16 10/7/16 18 1.3.1 Project Kickoff Meeting 9/19/16 9/19/16 0 1.3.2 Verify Validate User Requirements 9/19/16 9/23/16 4 1.3.3 Design System 9/23/16 10/3/16 10 1.3.4 Procure Hardware/Software 10/3/16 10/5/16 2 1.3.5 Install Development System 10/5/16 10/7/16 2 1.4 Implementation 10/7/16 10/17/16 10 1.4.1 Project Management 10/7/16 10/17/16 10 1.4.2 Project Status Meetings 10/7/16 10/17/16 10 1.4.3 Risk Management 10/7/16 10/17/16 10 1.4.4 Update Project Management Plan 10/7/16 10/17/16 10 1.5 Testing 10/17/16 11/1/16 14 1.5.1 Test Scope 10/17/16 11/1/16 14 1.5.2 Test Plan Preparation 10/17/16 11/1/16 14 1.5.3 Test Case Creation 10/17/16 11/1/16 14 1.5.4 Test Execution 10/17/16 11/1/16 14 1.5.5 Defect Reporting 10/17/16 11/1/16 14 1.6 Closeout 11/1/16 11/11/16 10 1.6.1 Audit Procurement 11/1/16 11/11/16 10 1.6.2 Document Lessons Learned 11/1/16 11/11/16 10 1.6.3 Update Files/Records 11/1/16 11/11/16 10 1.6.4 Gain Formal Acceptance 11/1/16 11/11/16 10 1.6.5 Archive Files/Documents 11/1/16 11/11/16 10 The project schedule has been designed as per the activities that are covered in the Work Breakdown Structure of the project as shown above. Each of the activity has been allotted a time frame as per the list of the sub-activities that are present under the same along with the effort that is required to complete all of the tasks. Initiation and Planning activities have been allotted 12 days each as the base of the project will be formed in these two phases only. It is essential for the resources to have the time at their hands to cover and complete each of the activity with perfection to avoid risks and delays at the later stage. Analysis and design has captured the major schedule that is 18 days as this is the phase in which the actual design and development will take place. Implementation, testing and closeout have covered a share of 10 days each as there are a number of components that are involved under each of these. The entire schedule has been created such that the resources get the required amount of time and are able to meet the deadlines as well. The schedule has been designed as per the systems goals, requirements and scope. The basic aim of the system is to provide an automated Inventory Management and Tracking System to the users for smooth and quick working. The schedule covers all the required phases that will aid in achieving the same. Also, the time that has been assigned is in accordance with the same as described above. Figure 1: Gantt chart System Information Requirement Investigation Techniques Stakeholders There are a number of stakeholders that will be involved with the system which are as listed below: Internal Stakeholders: Project Manager System Developer System Designer Database Administrator Test Engineer Implementation Head External Stakeholders: Project Sponsor Jim Larsen and his team Customers Suppliers Vendors Technicians Information Investigation Techniques Technique 1 A questionnaire must be prepared by the analysts for all the parties that are involved. It shall cover the basic criteria of the information collection by including the questions that answer the objective of the system being developed, the business need of the system, the target audience and likewise. These set of questions can also be divided in a number of different categories to record the answers better. Technique 2 The second technique that can be adopted is a one-on-one interview session with the parties. The interviews would allow the personal standpoint of the entity which may be absent in the group discussions. It will also allow the analysts to understand the variety of viewpoints and come up with an effective analysis (processworksgroup.com, 2016). Technique 3 The third technique that can be used for information investigation and gathering is through workshops and sessions. These can be informal in nature so that the parties that are involved ease out and are able to provide effective information without any hesitation. It will allow the analysts to understand the behaviour and requirements of the participants in an excellent manner. All the three techniques that have been described are different from each other. Questionnaires and interviews are the most applicable when the anonymity of the resources has to be maintained. The third technique of workshops is applicable when it is necessary to understand the standpoint of an individual along with the group as a whole. These three techniques are extremely useful not only to extract the information from the parties that are involved but to also make the resources feel involved in a particular activity by assuring them that their viewpoints are being considered. These are also important for the analysts to understand the difference of opinion of an individual in a group atmosphere and in the standalone environment as well. Reflections and Conclusions The project development cost was restricted to $80,000,00 and the recurring cost was $25,000,00. The same had to be maintained to avoid any budget overruns. Also, the project schedule did not have any scope for delays and re-work. The project was designed for allowing the customers and technicians to have a better experience in terms of inventory related activities. It was developed to provide an automated solution to the associated parties and the requirement set also reflects the same. Non-functional requirements were also included in the project to make sure that the user experience with the system that is developed is of utmost quality and results in supreme level of customer satisfaction. References Ambler, S. (2016). The Agile System Development Life Cycle (SDLC). [online] Ambysoft.com. Available at: https://www.ambysoft.com/essays/agileLifecycle.html [Accessed 23 Aug. 2016]. Habib, M. (2013). Agile software development methodologies and how to apply them - CodeProject. [online] Codeproject.com. Available at: https://www.codeproject.com/Articles/604417/Agile-software-development-methodologies-and-how-t [Accessed 23 Aug. 2016]. Hoffer, J., George, J. and Valacich, J. (2016). System Analysis Design. [online] Available at: https://www.cs.kau.se/~gustas/student/AnalysisDesign/Introduction(2).pdf [Accessed 23 Aug. 2016]. PUROHIT, S. (2016). SYSTEM REQUIREMENTS SPECIFICATIONS FOR THE PROJECT INVENTORY CONTROL SYSTEM FOR CALCULATION AND ORDERING OF AVAILABLE AND PROCESSED RESOURCES. [online] Available at: https://www.cs.uic.edu/~spurohit/documents/Requirements%20Document.pdf [Accessed 23 Aug. 2016]. Lott, C. (1997). Breathing new life into the waterfall model. IEEE Software, [online] 14(5), pp.103-105. Available at: https://dx.doi.org/10.1109/52.605938 [Accessed 23 Aug. 2016]. Zentz, M. (2016). Custom vs. Off-the-Shelf Software | Digital Marketing Insights | The Marketpath Web Digest. [online] Marketpath.com. Available at: https://www.marketpath.com/digital-marketing-insights/custom-applications-vs-off-the-shelf-software [Accessed 23 Aug. 2016].